-
Industrial Heat ExchangersGYRO provides engineering design, fabrication, installation and technical services for Industrial Heat Exchangers. Custom non-standard design is available in accordance with process media,read more
-
Exhaust Gas Heat ExchangerAn exhaust gas heat exchanger recovers usable thermal energy from industrial exhaust and flue gas streams for process heating applications. We engineer custom heat-transfer equipment forread more
-
Feed Product Heat ExchangerHigh utility demand, limited temperature cross, and inefficient heat integration can increase process operating costs. Our feed product heat exchanger transfers heat from a hot product or effluentread more
-
Acid Gas PreheaterThe Acid Gas Preheater is used in natural gas processing, oil refining, and sulfur recovery units; through controlled heating, it addresses issues such as excessively low acid gas temperatures,read more
-
Column Bottom Product Heat ExchangerGYRO customizes heat exchanger solutions for column bottom products based on material temperature, flow rate, viscosity, and fouling characteristics to help you reduce utility consumption; we supportread more
-
Corrugated Tube Heat ExchangerThe corrugated tube heat exchanger is a high-efficiency unit that enhances heat transfer through its corrugated design. Compared to standard smooth-tube heat exchangers, it offers superior heatread more
-
Threaded Tube Heat ExchangerHeat transfer enhancement solution for threaded tube heat exchangers. The specialized threaded tube structure induces continuous fluid turbulence within the tubes, thereby improving heat transferread more
-
Finned Tube Heat ExchangerIf your project lacks the space to add more equipment but requires increased heat transfer capacity, a finned-tube heat exchanger is the superior choice. It is generally suitable for media with lowread more
-
U Tube Heat ExchangerU-tube heat exchangers are designed for high-temperature applications involving large temperature differentials. The U-tube bundle effectively accommodates thermal expansion stresses, therebyread more
Apr 18, 2019 · April 18, 2019. Water/glycol-based, closed-loop air-cooled systems are designed for cooling a process that can operate at a temperature at least 5 to 10°F (3 to 5°C) above the ambient...
Using a type of special deck pan on which the product is placed, a chilled fluid (glycol) is circulated by a pump in the case that then flows back to heat exchanger (also located in the case) that...
May 09, 2016 · Minimum Velocity with Glycol-Based Heat Transfer Fluids When selecting a shell and tube heat exchanger, the goal is to select a heat exchanger with a velocity that is high enough to...
Jan 28, 2022 · 100 percent glycol (EG or PG) is only about half as good at transferring heat as H2O. A 50/50 mix is a compromise that transfers heat good enough and doesn't freeze. tommay said: Maybe...
After leaving the glycol regenerator the lean glycol has to be cooled down to approximately the feed gas temperature. A part of this heat is used to heat the...
Apr 18, 2019 · Water/glycol-based, closed-loop air-cooled systems are designed for cooling a process that can operate at a temperature at least 5 to 10°F (3 to 5°C) above the ambient air. The...
